Top 10 Companies in the Global Automotive Crankcase Additives Market (2025-2035): Expert View by Spherical Insights

According to a research report published by Spherical Insights & Consulting, the Global Automotive Crankcase Additives Market Size is projected to grow from USD 12.89 Billion in 2024 to USD 22.51 Billion by 2035, at a CAGR of 5.2% during the forecast period 2025–2035. Global market expansion is fuelled by strict environmental regulations demanding high-performance lubricants and the continuous expansion of the worldwide automotive manufacturing industry.

 

Introduction

The primary factors propelling the market are strict environmental regulations demanding high-performance lubricants and the continuous expansion of the worldwide automotive manufacturing industry. As the two are connected, the demand for automobile crankcases increases along with car production. Because cars are now considered to be needs, the increase in disposable money has fuelled vehicle sales, which immediately helps the market for automobile crankcase additives. The market is also greatly influenced by the rising need for improved operational efficiency and fuel economy. Automakers are increasingly developing engines requiring low-viscosity lubricants improved with friction modifiers to meet sustainability targets and minimize energy consumption. This shift challenges additive producers to develop distinctive solutions that offer environmentally friendly performance yet preserve stability under greater heat stress. Moreover, governments throughout the world are trying to reduce damaging emissions in order to preserve the environment. Because of their broad use to lower tailpipe emissions, the worldwide demand for automotive crankcase additives has grown.

 

 

Navigate Future Markets with Confidence: Insights from Spherical Insights LLP

The insights presented in this blog are derived from comprehensive market research conducted by Spherical Insights LLP, a trusted advisory partner to leading global enterprises. Backed by in-depth data analysis, expert forecasting, and industry-specific intelligence, our reports empower decision-makers to identify strategic growth opportunities in fast-evolving sectors. Clients seeking detailed market segmentation, competitive landscapes, regional outlooks, and future investment trends will find immense value in the full report. By leveraging our research, businesses can make informed decisions, gain a competitive edge, and stay ahead in the transition toward sustainable and profitable solutions.

 

Unlock exclusive market insights—Download the Brochure now and dive deeper into the future of the Automotive Crankcase Additives Market.

 

   Automotive Crankcase Additives Market Size & Statistics

• The Market Size for Automotive Crankcase Additives Was Estimated to be worth USD 12.89 Billion in 2024.
• The Market Size is Going to Expand at a CAGR of 5.2% between 2025 and 2035.
• The Global Automotive Crankcase Additives Market Size is anticipated to reach USD 22.51 Billion by 2035.
• Asia-Pacific is estimated to dominate the market during the forecast period in the Automotive Crankcase Additives Market.
• Europe is projected to grow the fastest during the forecast period in the Automotive Crankcase Additives Market.

 

Global Automotive Crankcase Additives Market Size, Share, By Product Type (Antioxidants, Friction Modifiers, Detergent Additives), By Vehicle Type (Passenger and Commercial), and By Region (North America, Europe, Asia-Pacific, Latin America, Middle East, and Africa), Analysis and Forecast 2025 – 2035.

 

Regional growth and demand

 

Asia-Pacific is expected to dominate the market during the forecast period in the automotive crankcase additives market.

Asia-Pacific held the majority of the market share by revenue for the automotive crankcase additives market due to massive automotive production infrastructure. The engine lubricant and additive market in China, India, and Japan experiences growth because these countries have high rates of vehicle production. The stringent environmental regulations in India require high-performance additives to meet Bharat Stage VI standards and China VI standards established by the Ministry of Ecology and Environment. The region establishes its global dominance through these regulations that require advanced formulas to maintain engine performance and meet emission standards.

 

Unlock exclusive market insights—Download the Brochure now and dive deeper into the future of the Automotive Crankcase Additives Market.

 

Europe is projected to grow the fastest during the forecast period in the automotive crankcase additives market.

Europe is projected to grow the fastest during the forecast period in the automotive crankcase additives market. Strict environmental regulations require industrial processes to use high-performance, low-emission additive packages, which currently drive European market growth. The region requires synthetic lubricants and bio-based additives for its biofuel premiumization products because of its commitment to sustainable development and highly developed premium products. Automotive manufacturers in Germany, France, and the UK operate major production facilities to develop advanced engine protection systems dedicated to small, turbocharged engines.

 

Top 10 Trends in the Automotive Crankcase Additives Market  

• Change to Low-Viscosity lubricants
• Strict Emission Compliance
• Growth of Nanotechnology-Based Additives
• Extended Drain Intervals
• LSPI Mitigation in Downsized Engines
• Growing Demand in Asia-Pacific
• Increased Focus on Sustainable and Bio-based Additives
• Collaborations and Partnerships
• Premiumization of the Aftermarket
• Electrification Impact and Hybrid-Specific Additives

 

Unlock exclusive market insights—Download the Brochure now and dive deeper into the future of the Automotive Crankcase Additives Market.

 

1. Change to Low-Viscosity lubricants

OEMs are increasingly proposing low-viscosity lubricants (such as 0W-16 and 0W-12) in order to satisfy worldwide fuel economy targets. To preserve engine protection at thinner coating levels, they call for specific friction modifiers and viscosity index improvers (VII).

 

     2.Strict Emission Compliance

A move toward "Low-SAPS" (Sulfated Ash, Phosphorus, and Sulfur) additives is being rapidly implemented due to pressure from growing environmental laws in North America and Europe. These compositions prevent clogging and poisoning of aftertreatment systems such as Three-Way Catalysts and Diesel Particulate Filters (DPF).

 

      3.Growth of Nanotechnology-Based Additives

Businesses like Calyxia and Purify Fuel are leading the way in the application of nano-additive packaging. Compared to conventional chemical packages, these offer better heat stability, less oil deterioration, and increased fuel efficiency.

 

      4.Extended Drain Intervals

Additives that prolong the intervals between oil changes are much sought after in the market. To protect lubricants from heat stress over extended running times, strong antioxidants and detergents are being developed.

 

      5.LSPI Mitigation in Downsized Engines

Low-Speed Pre-Ignition (LSPI) can result in catastrophic engine damage in turbocharged direct injection (TGDI) engines. To lessen this effect, some detergency systems (often calcium-reduced) are now included in modern additive packages.

 

Unlock exclusive market insights—Download the Brochure now and dive deeper into the future of the Automotive Crankcase Additives Market.

 

Empower your strategic planning

Stay informed with the latest industry insights and market trends to identify new opportunities and drive growth in the anti-venom market. To explore more in-depth trends, insights, and forecasts, please refer to our detailed report.

 

Top 10 Companies Leading the Automotive Crankcase Additives Market

1. The Lubrizol Corporation
2. Infineum International
3. Afton Chemical
4. Chevron Oronite
5. BASF SE
6. Evonik Industries
7. LANXESS AG
8. Croda International
9. Dorf ketal
10. Innospec Inc.

 

1. The Lubrizol Corporation

Headquarters: Wickliffe, USA

The Lubrizol Corporation is a US-based company. In 2024, its overall revenue was about $6.5 billion. Moreover, its establishment was in 1928, whereas its main product line consists of engine oil additives, driveline additives, and fuel additives, and viscosity modifiers. Additionally, it has excellent focus and market share in viscosity index improvers. It is active in more than 60 locations in 27 countries.

 

      2.Infineum International

Headquarters: Milton Hill, UK

It is an establishment of 1999 with revenue for the year 2024 estimated to be of $ 5.0 billion. Its core product range consists of additives for automotives, heavy-duty diesel, and marine engines. The majority of working sites are in UK, the USA, France, and Germany. Moreover, it has high expertise in low-SAPS technology.

 

      3.Afton Chemical

Headquarters: Richmond, Virginia, USA

It was formed in 1887 and belongs to New Market Corporation and also a pioneer in hydrogen engine additives. It specialises in driveline additives, engine oil additives, and industrial additives. Its 2023 gross revenue was around $2.7 billion and has 25 active site’s locations globally.

 

       4.Chevron Oronite

Headquarters: San Ramon, California, USA

It is an establishment of 1917 and had group revenue of $202.8 billion in 2024 through its global 4 manufacturing centres and 11 technological sites. Moreover. It is the important manufacturer of LSPI-resistant additives packages for TGDI engines in the world, and its product line consist of finished lubricants, fuel additives and specialized crankcase components.

 

      5.BASF SE

Headquarters: Ludwigshafen, Germany

A multinational corporation based in Germany that is the world's biggest manufacturer of chemicals. BASF operates over 390 production sites across Europe, Asia, Australia, the Americas, and Africa through subsidiaries and joint ventures in more than 80 countries. Its total revenue in 2024 was USD 64.3 billion. Its key product line consists of IRGOLUBE brand antioxidants, GLYGOFLUX friction modifiers, and base oils.

 

Unlock exclusive market insights—Download the Brochure now and dive deeper into the future of the Automotive Crankcase Additives Market.

 

Are you ready to discover more about the Automotive Crankcase Additives Market?

The report provides an in-depth analysis of the leading companies operating in the global automotive crankcase additives market. It includes a comparative assessment based on their product portfolios, business overviews, geographical footprint, strategic initiatives, market segment share, and SWOT analysis. Each company is profiled using a standardised format that includes:

 

Company Profile

1. The Lubrizol Corporation

• Business Overview
• Company Snapshot
• Products Overview
• Company Market Share Analysis
• Company Coverage Portfolio
• Financial Analysis
• Recent Developments
• Merger and Acquisitions
• SWOT Analysis

 

Unlock exclusive market insights—Download the Brochure now and dive deeper into the future of the Automotive Crankcase Additives Market.

 

Conclusion

The global automotive crankcase additives market size is expected to grow at a compound annual growth rate (CAGR) of 5.2%, from USD 12.89 billion in 2024 to USD 22.51 billion by 2035. Global market expansion is fuelled by strict environmental regulations demanding high-performance lubricants and the continuous expansion of the worldwide automotive manufacturing industry. Asia-Pacific is expected to dominate the market during the forecast period in the automotive crankcase additives market due to its massive automotive production infrastructure, whereas Europe is projected to grow the fastest during the forecast period in the automotive crankcase additives market because of strict environmental regulations require industrial processes to use high-performance, low-emission additive packages.